Neoprene rubber sheet
Data sheet
Description
Neoprene rubber sheet is a kind of rubber sheet which has good physical and mechanical properties, and oil resistance, heat resistance, fire resistance, daylight resistance, ozone resistance, acid and alkali resistance, chemical resistance.Therefore, neoprene is widely used, which can be used as both general rubber and special rubber.Neoprene also has shortcomings, its cold resistance and storage stability is poor.
Applications
The working medium is dilute acid, dilute alkali liquor or strong acid, strong alkali and other chemicals.NR, CR, EPDM and fluororubber are commonly used to make rubber.It could be used as acid and alkali resistant lining, gasket and gasket etc.Neoprene rubber sheet is used for punching various oil-resistant seals, seals and rings, laying of worktable, floor, electronic products and hot aging sites in contact with grease. It has good sealing and expansion resistance.
Technical
Operating temperature -30℃to 60℃; Working in oil (oil, diesel oil, gasoline, lubricating oil) medium, with oil resistance, acid and alkali resistance, cold and heat resistance, aging resistance and other properties.
Density : 1.5g/cm³;
Pulling force: 5Mpa;
Elongation: 280%;
Hardness: 70°±5°.
Nitrile Rubber Sheet
Data sheet
Description
Nitrile rubber sheet is produced by emulsion polymerization of butadiene and acrylonitrile. Nitrile rubber is mainly produced by low-temperature emulsion polymerization. Working in oil (oil, diesel oil, gasoline, lubricating oil) medium, with tightness and expansion resistance. It can be used for punching all kinds of oil-resistant oil seals, seals, rings, and the laying of the workbench, ground and electronic products in contact with oil.
Technical
Density : 1.7g/cm³.
Tensile Strength: ≥3.5Mpa.
Elongation: 350%.
Hardness: 65°±5° Shore A.
Size：Width （500mm to1500mm）×Thickness（1 to 60mm）.
Working Temperature：-30℃ to 80℃.
Package: plastic bag and woven bag.
Color: Green, yellow, gray, black, white, red ,blue and so on.
